Hot water guide

Water heater replacement cost: what sets the price in Toronto

A water heater quote depends on the type you're replacing it with and what has to change around it, more than on the tank itself. Here's what actually moves the price.

Toronto Mechanical Services · Updated September 2026

Furnace not heating or something else wrong? Call and tell us what it is doing.

Call (647) 674-2387

What sets the price on a water heater replacement

A water heater replacement quote depends on which type you're replacing it with, whether the venting has to change, and what the house's gas line and access look like, more than on the tank itself. Two houses with similar households can land on very different jobs. We look at the existing setup before quoting.

Tank, power-vent, or tankless

A standard tank stores and heats a set volume of water and is the simplest install where the venting already suits it. A power-vented tank uses a fan to push exhaust out through a side wall in plastic pipe instead of a chimney, which is a common option when the chimney is no longer available to it. Tankless heats water on demand instead of storing it, and needs its own venting and a gas line sized for its burner. Which of the three fits your house depends mostly on the venting and gas supply already there, and on how the household uses hot water. See tank and tankless water heaters for how we walk through that.

Each of the three has its own installation profile beyond the unit itself. A tank swap where the venting is unchanged is close to a straightforward like-for-like job, while a switch from tank to tankless, or tank to power-vent, brings venting and sometimes electrical work into the quote that a like-for-like tank replacement doesn't need.

A tank or tankless unit that's undersized for how the household actually uses hot water shows up quickly, running short during back-to-back showers or leaving the dishwasher waiting. Getting the capacity right is part of what we're pricing, not a separate decision from the type of unit, since a bigger tank or a higher-output tankless unit can also change what the venting and gas supply need to support.

Venting changes: when the old chimney no longer works

Older Toronto houses often vented the furnace and the water heater into the same chimney. When the furnace is changed to a high-efficiency model that vents through the wall in plastic pipe, the water heater can be left alone on a flue sized for two appliances, and it may stop drafting properly. If that's the situation in your house, the water heater replacement may need a chimney liner or a switch to power-vent or direct-vent, and that's a real part of the quote, not an add-on mentioned later.

Venting problems on a gas appliance aren't only a comfort issue. Poor draft can let combustion exhaust spill into the house instead of outside, which is part of why we check the flue and don't leave a water heater in a marginal venting situation. We check the venting on the visit, whichever type of water heater you're considering.

Gas line sizing for tankless

A tankless unit's burner is sized to heat water instantly rather than store it, which typically asks more of the gas line than a tank does. In an older house with a smaller gas line, upsizing the line to the water heater, and sometimes the run from the meter, can be the deciding factor in tankless cost. We check the existing gas line size and pressure before quoting tankless, and tell you plainly if the gas work makes tankless a bigger job than a tank swap.

Expansion tanks and other code items

A closed water system, where a check valve or pressure-reducing valve keeps water from flowing back toward the street, needs an expansion tank to absorb the pressure that builds as water heats. Whether your system already has one, and whether it's sized for the new tank, is one of the things we confirm. Code items like this vary by what the house already has, and any permit or inspection the job needs belongs on the quote from the start, not as a surprise afterward.

A gas water heater also needs a proper vent connector and combustion air supply that meet current code, which an older installation sometimes predates. We check these along with the expansion tank, since bringing an older setup up to code is part of a replacement, not an optional extra.

Location, access, and haul-away

A water heater in an open mechanical room is a faster swap than one in a finished basement closet, behind stored belongings, or down a narrow stairwell. Access affects labour on both the old unit's removal and the new one's install. Hauling away the old tank or tankless unit is part of a straightforward replacement quote, so it's worth checking it's actually listed rather than assumed.

In a condo or townhouse, replacing a water heater can also involve coordinating access with building management, which affects scheduling more than it affects the cost of the unit itself.

If your water heater is rented

Many Ontario homes rent their water heater. A rented tank belongs to the rental company, and ending a rental to buy your own is between you and that company. If you're weighing that decision, we can quote an owned tank or tankless replacement so you have something concrete to compare it against.

Getting a quote

Send us the age of your water heater and whether it's a tank or tankless, and let us know if your furnace's venting was changed at some point. We book a visit, check the venting, the gas line, and the access, and put together a written quote for the type that fits. Our guide on furnace replacement cost in Toronto covers a similar breakdown for furnaces, and boiler and combi service is the place to look if your house heats with hot water instead of forced air. Request a visit to get started.

Questions

Does switching from a tank to tankless cost more than a like-for-like tank swap?

It can, mainly through gas line and venting work. Tankless needs its own venting and often a larger gas line than a tank, so the difference comes down to what your house's existing gas and venting can already support.

Is haul-away of the old water heater included in a replacement quote?

It should be, and it's worth confirming rather than assuming. Hauling away the old tank or tankless unit is a normal part of a straightforward replacement quote.

Do I need a permit to replace a water heater?

It depends on the scope of the work and the municipality. If a permit or inspection applies, it belongs on the quote so it's not a surprise later.

What is an expansion tank and do I need one?

It absorbs the pressure that builds in a closed water system as water heats. Whether your house already has one, and whether it's sized correctly, is something we check before quoting a replacement.

Does where my water heater sits affect the price?

Yes. A unit in an open mechanical room is a faster swap than one in a finished closet, behind stored belongings, or down a narrow stairwell, since access changes the labour on both the removal and the install.

The services

More guides

Get a written quote for tank + tankless water heaters

Name and phone are required.

Your service request

We’ll use your details to respond to your request. Privacy policy

  1. We call you back

    At the number you gave us, to ask what the equipment is doing.

  2. We book a window

    A day and time that works. Scheduled visits outside the regular route.

  3. Written quote before work

    You see the number before anything is replaced. Nothing starts until you say so.

CallRequest service