Heating guide

Heat pump cost in Ontario: what actually sets the price

A heat pump quote depends on more than the equipment. Ductwork, your electrical panel, and whether the furnace stays on as backup all move the price, and the sections below cover each one.

Toronto Mechanical Services · Updated September 2026

Furnace not heating or something else wrong? Call and tell us what it is doing.

Call (647) 674-2387

There's no single number for a heat pump

A heat pump quote depends on more variables than a furnace or AC quote, because it usually touches your ductwork, your electrical panel, and sometimes the backup heat plan for winter, in addition to the equipment itself. Two houses of the same size can land on very different jobs depending on what's already there. We look at the house before quoting, and the sections below cover what moves the price up or down.

Ducted or ductless

A ducted heat pump connects to existing forced-air ductwork and generally replaces or works alongside a furnace and central AC, so if the ducts are already sized and in good shape, that side of the job is simpler. A ductless heat pump needs one or more indoor heads and a line-set run to an outdoor unit instead, which suits houses with no ductwork, like older radiator homes, or a specific room central air never reached. See heat pump installation and mini-splits for how each is installed.

Cold-climate rating

Heat pumps built to keep producing heat well below freezing cost more than standard models, and that rating is one of the bigger price drivers in the equipment itself. It also matters for comfort: a standard heat pump can fall off fast on a cold Toronto night, while a cold-climate model is built to keep carrying the load. We compare the manufacturer's rated output at low temperatures against your house's heat loss before recommending a model.

Sizing, capacity, and ductwork condition

Unlike an AC, which only has to be sized for summer cooling, a heat pump has to be sized for heating first: how much heat it can deliver on the coldest night of the year. That comes from a load calculation on your house, not from copying the size of the AC it's replacing. An AC sized only for cooling is very often undersized for heating a Toronto house in January. Capacity affects equipment cost directly, and a heat pump sized wrong either short-cycles or can't keep up, so this step isn't optional.

On a ducted heat pump, the existing ductwork also has to move enough air for the unit's output in both directions, heating and cooling. Undersized returns or leaky supply runs that were tolerated by an older furnace and AC can become a bigger issue with a heat pump running longer at a lower output for more of the season. In a house where the ducts are already sized well, this barely changes the price; in an older bungalow with narrow returns, it can be one of the bigger line items on the job.

Electrical panel and line-set run length

A heat pump needs its own dedicated circuit, and how much work that takes depends on what's already in the panel. Some older Toronto homes have panels that are already close to full, or a service that's small for the load a heat pump adds on top of everything else running in the house. We check the panel before quoting and tell you if an electrician needs to look at it first. That work, when it's needed, is a real part of the total.

On a ductless or hybrid ductless setup, the refrigerant line set runs from the outdoor unit to each indoor head, and how far that run is, and how many corners or floors it crosses, changes both the material and the labour. An outdoor unit sitting right below the head it serves is a shorter, simpler run than one that has to reach a third floor around the back of a semi. We plan the route and the outdoor unit's placement before pricing it.

Keeping the furnace as backup, and removing the old AC

A dual-fuel setup pairs a heat pump with your existing gas furnace: the heat pump carries most of the heating season, and the furnace takes over in the coldest stretches. This is often the lower-disruption path if the furnace is in good shape, since the ductwork and much of the gas side stay as they are, and it avoids sizing the heat pump, and the electrical work behind it, for the single coldest night of the year. Going heat-pump-only, or removing a working furnace, is a different scope.

If a heat pump is replacing a central AC instead, removing the old outdoor unit and any indoor coil that won't be reused is part of the job, and the new heat pump has to be matched to what stays, particularly the furnace's blower if the ductwork is being kept. Because a heat pump runs through more of the year than a summer-only AC, where the outdoor unit sits, and how much noise it puts toward a neighbour's window, is also worth planning for at the same time as the old unit's removal.

Rebates

Ontario's Home Renovation Savings program currently covers qualifying heat pumps. Amounts change, and the homeowner claims it through a contractor registered with the program. Ask and we will tell you what applies to your house.

Getting a quote

Send us the age and type of your current heating and cooling equipment, and let us know whether the house has existing ductwork. We book a visit, look at the ductwork or the space for indoor heads, the electrical panel, and the outdoor unit location, and put together a written quote from that. If you're weighing a heat pump against a straight furnace replacement, our guide on furnace replacement cost in Toronto covers the other side of that decision. Request a visit to get started.

Questions

Is a ductless heat pump less work to install than a ducted one?

It depends on the house. A ducted heat pump reuses ductwork that's already there, which can be simpler if the ducts are in good shape. A ductless system needs line sets and indoor heads instead, which suits a house with no ductwork at all.

Does keeping my gas furnace as backup change the price?

Yes, in both directions. A dual-fuel setup avoids sizing the heat pump for the coldest night of the year, but it also means integrating the furnace's controls with the new heat pump rather than a standalone install.

Will my electrical panel need work before a heat pump goes in?

Sometimes. A heat pump needs its own dedicated circuit, and older panels that are already close to full may need an electrician's attention first. We check the panel as part of the quote.

Does the outdoor unit's location affect the cost?

Yes, mainly through the refrigerant line-set run. An outdoor unit close to the indoor head or air handler is a shorter, simpler run than one that has to reach around the house or up multiple floors.

Are heat pump rebates available in Ontario right now?

Ontario's Home Renovation Savings program currently covers qualifying heat pumps. Amounts change, and the homeowner claims it through a contractor registered with the program. Ask and we will tell you what applies to your house.

The services

More guides

Get a written quote for heat pumps

Name and phone are required.

Your service request

We’ll use your details to respond to your request. Privacy policy

  1. We call you back

    At the number you gave us, to ask what the equipment is doing.

  2. We book a window

    A day and time that works. Scheduled visits outside the regular route.

  3. Written quote before work

    You see the number before anything is replaced. Nothing starts until you say so.

CallRequest service