Two different systems, not two versions of the same thing
A furnace heats air and pushes it through ductwork. A boiler heats water and circulates it through radiators, baseboards, or tubing in the floor. A combi boiler is a specific type of boiler that also makes hot water on demand, replacing a separate tank. Whether a combi makes sense for your house depends mostly on what's already there, radiators and hydronic piping, or ductwork, not on which sounds more modern.
Radiator and in-floor houses versus forced-air houses
Many pre-war Toronto houses were built with a boiler and cast-iron radiators and never had ductwork installed. A combi boiler fits naturally into that kind of house, since it connects to the existing radiator piping rather than needing anything new run through walls or ceilings. A house that already heats with forced air and ductwork is the opposite case: a furnace, not a boiler, is almost always the simpler like-for-like replacement there, since the ductwork is designed around moving air, not circulating hot water.
None of this requires changing the radiators, the piping through the house, or the floor loops already in place. A combi, or any replacement boiler, connects to what's there; it's the boiler itself, its venting, and sometimes the gas line into it that change. The parts of the system a homeowner actually sees and lives with day to day usually stay exactly as they are.
What a combi boiler actually does
A combi boiler does two jobs from one unit: it heats the home through the radiators or loops connected to it, and it heats domestic hot water on demand as you draw it, with no separate storage tank. That's different from a system boiler, which only heats the home and needs a separate tank for hot water. Combi hot water output is limited by how fast the unit itself can heat water flowing through it, similar to a tankless water heater, so how many fixtures draw hot water at the same time matters when sizing one.
The heating side works the same as any boiler feeding radiators or floor loops. It's specifically the hot water side that behaves differently from a tank, closer to how a tankless water heater behaves. A combi vents through the wall in plastic pipe, similar to a high-efficiency furnace or a tankless water heater, rather than up a chimney, which means finding a clear exterior wall spot for the intake and exhaust with the clearances the installation needs. That's usually straightforward on a detached house and takes more planning on a semi with a narrow side yard or a condo where the wall belongs to a shared exterior.
Gas piping and existing systems
Where a combi is replacing an older boiler that also fed a separate hot water tank, the piping changes: the tank and its connections come out, and the gas line serving the old setup gets reconfigured for the combi alone. In a house that never had a separate tank, less changes on the gas side. We check what the existing piping was doing before pricing what has to change.
Townhouses and condos
A combi boiler's compact size and lack of a separate tank suit townhouses and condo townhouses where the mechanical closet is small, and it's a common fit where space is at a premium. The compact size also matters in a detached house with a small mechanical room, not only in a condo, wherever floor space is tight. Work in a condo building usually needs building management approval, set hours, and an elevator booking arranged ahead of time, which is worth building into the timeline for any boiler work in a condo.
Converting from radiators to forced air has its own complications
A house with radiators and no ducts sometimes considers adding forced-air furnace and central AC instead of keeping hydronic heat, but that usually means running ductwork through finished walls and ceilings from scratch, which is a much bigger renovation than replacing the boiler. If the goal is adding air conditioning to a radiator house rather than replacing the heat itself, ductless mini-splits usually make more sense: they add cooling, and extra heat if you want it, without any ductwork, while the boiler and radiators stay in place for the main heat.
When a system boiler with a separate tank fits better
A combi isn't the only option, and it isn't always the right one. A house with high simultaneous hot water demand, several bathrooms running at once, or a large household, can outpace what a combi's on-demand heating can deliver at one time. In that case a system boiler paired with a separate indirect hot water tank, which stores hot water heated by the boiler rather than making it on demand, can serve the house better. See boiler and combi service for how we size between the two, and water heater options for how storage-based hot water compares to on-demand.
Deciding between the two
The starting point is what your house already has: radiators and hydronic piping point toward a boiler, and a combi specifically if the mechanical space is tight and hot water demand is moderate. Ductwork points toward a furnace. We look at your existing system, the household's hot water use, and the space available, and tell you which setup we'd recommend, combi, system boiler with a tank, or a straight furnace, before you decide. Request a visit to get a written recommendation for your house.